VALVE JOB

I installed the valves yesterday and today with the adjustable tappets I had ordered. Wow was that a tricky job. Trying to adjust the clearance with the valve guides falling out over and over. I finally figured out to turn the engine on its side. I used a regular valve spring compressor but it was too big so I had to place a spacer block on top of the valve head to make it work. Very tedious. #7 still needs a keeper (on order).

Following that chore I needed some inspiration so I hung the bling on the block to see what it will be like. I like it!!

I am waiting for the machine shop to finish up the one bad rod babbitt and then the crank and pistons go in and the engine can be finished up and installed. WOW.