HYDRAULIC FRONT BRAKE REPAIR

This car came to me with hydraulic front brakes mounted but not hooked up. The back plate assembly is from a Rover 400 sedan rear brakes, so I've been told. I'm not too sure as you will soon see. 

 I got a leak in one of the seals in the wheel cyl. Since the rover sedan was never imported to the US I knew I would have a problem. After ordering two different seals for a Rover 400 ans spending more money than I wanted to I still had nothing usable. The final solution was to make new pistons and buy MGTD seals.

The bore is 3/4" but the MG seals had a different inside diameter so that required me to make new pistons much like the ones shown above. For some reason I never took photos of the new ones. This has worked perfectly and I will do the same for the other side if needed.